Standard ECMA-201 (via Mowser)

Standards

Withdrawn Tech. Reports

Mementos

Printer Friendly Version

Back Back

Standard ECMA-201
Data Interchange on 90 mm Optical Disk Cartridges - Capacity: 230 Megabytes per Cartridge

2^nd edition (December 1994)

This Ecma Standard specifies the characteristics of 90 mm Optical Disk Cartridges (ODC) with a capacity of 230 Mbytes per Cartridge. The Standard specifies three related, but different implementations of such cartridges, viz.

Type R/W
Provides for data to be written, read and erased many times over the whole recording surface of the disk using the thermo-magnetic and magneto-optical effects.

Type P-ROM
Provides for a part of the disk surface to be embossed by stamping or other means. This part of the disk is read without recourse to the magneto-optical effect. All parts which are not embossed provide for data to meet the requirements of Type R/W.

Type O-ROM
Provides for the whole of the disk surface to be embossed and reproduced by stamping or other means. This type of disk is read without recourse to the magneto-optical effect.

Type R/W, Type P-ROM and Type O-ROM are also referred to as "fully rewritable", "partially embossed" and "fully embossed", respectively.

This Ecma Standard specifies

the conditions for conformance testing and the Reference Drive; the environments in which the cartridges are to be operated and stored; the mechanical and physical characteristics of the cartridge, so as to provide mechanical interchangeability between data processing systems; the format of the information on the disk, both embossed and user-written; including the physical disposition of the tracks and sectors, the error correction codes, and the modulation method used; the characteristics of the embossed information on the disk; the magneto-optical characteristics of the disk, enabling processing systems to write data onto the disk; the minimum quality of user-written data on the disk, enabling data processing systems to read data from the disk.

This Ecma Standard provides for interchange between optical disk drives. Together with a standard for volume and file structure, it provides for full data interchange between data processing systems.

[image]

Copy these files, free of charge:

File name Size (Bytes) Content

ECMA-201.pdf 8 633 001 Acrobat (r) PDF file

Patent statements' list.pdf 1 121 475 Acrobat (r) PDF file

This Ecma publication is also approved as ISO/IEC 13963.

The previous replaced "historical" edition of this Ecma Standard is available here.

Back Back

You are viewing a mobilized version of this site...
View original page here