Standard ECMA-184 (via Mowser)

Standards

Withdrawn Tech. Reports

Mementos

Printer Friendly Version

Back Back

Standard ECMA-184
Data Interchange on 130 mm Optical Disk Cartridges - 1,3 Gigabytes per Cartridge

(December 1992)

This Ecma Standard specifies the characteristics of 130 mm Optical Disk Cartridges (ODC) with a capacity of 1,3 Gbytes per cartridge. The Standard specifies four related, but different implementations of such cartridges, viz.

Type R/W
Provides for data to be written, read, and erased many times over the whole of both recording surfaces of the disk using the thermo-magnetic and magneto-optical effects.

Type P-ROM
Provides for a part of both disk surfaces to be pre-recorded and reproduced by stamping or other means. This part of the disk is read without recourse to the magneto-optical effect. All parts which are not pre-recorded, provide for data to meet the requirements of Type R/W.

Type O-ROM
Provides for the whole of both disk surfaces to be pre-recorded and reproduced by stamping or other means. This type of disk is read without recourse to the magneto-optical effect.

Type WO
Provides write once, read multiple functionality on both disk surfaces using the thermo-magnetic and magneto-optical effects.

The Ecma Standard specifies

the conditions for conformance testing; the environments in which the cartridges are to be operated and stored; the mechanical, physical and dimensional characteristics of the case and of the cartridges, so as to provide mechanical interchangeability between the data processing systems; the format of the information on the disk, both embossed and user-written, including the physical disposition of the tracks and sectors, the error correction codes, and the modulation method used; the characteristics of the embossed information on the disk; the magneto-optical characteristics of the disk, enabling processing systems to write data onto the disk; the minimum quality of user-written data on the disk, enabling data processing systems to read data from the disk.

This Ecma Standard provides for interchange between optical disk drives. Together with a standard for volume and file structure, it provides for full data interchange between data processing systems.

[image]

Copy these file(s), free of charge:

File name Size (Bytes) Content

ECMA-184.pdf 7 734 586 Acrobat (r) PDF file

This Ecma publication is also approved as ISO/IEC 13549

Back Back

You are viewing a mobilized version of this site...
View original page here